mossberge maverick

by **rebel_cowboy** » Sun Jan 01, 2012 12:42 am

im having trouble getting my maverick to load the last shell in the tube and some times it kicks them ot the bottom when i close the action. any ideas on whats going on? would greatly appriciat the help

by **tigwelder56** » Sun Jan 01, 2012 2:17 pm

Have you changed the capacity at all? My first thought is a problem with the spring. If it's not strong or long enough it wouldn't feed that last round properly and it wouldn't hold adequate feed pressure on the follower. Not enough spring pressure could cause your problems.

by **rebel_cowboy** » Mon Jan 02, 2012 12:40 am

its brand new i havent changed anything on it ive used it once so far ill check it all over agian really lose thanks for the help

by **tigwelder56** » Mon Jan 02, 2012 1:20 am

Something is out of whack, as you're aware! Since it's new, take it back to the dealer while it's under warranty. Mossberg is very helpful. One other thing, what type of ammunition are you using?

by **rebel_cowboy** » Mon Jan 02, 2012 10:32 pm

winchester and remington

by **tigwelder56** » Mon Jan 02, 2012 11:26 pm

Nothing wrong with those choices. Have you tried anything else? Mine doesn't like the Sellior & Belloit stuff. I had trouble getting it to eject but no problems with anything else. I'm going to have to get out with it and will pay more attention to the areas you're having trouble with. I would still recommend you getting it back to your dealer for a warranty inspection!

by **GOANRA** » Thu Nov 15, 2012 3:45 pm

Warranty is best choice before it is "altered", but mossbergs are often easily fixed by putting in a new follower in the mag tube.
Easy fix, a few $ from brownells.com

mossberge maverick

mossberge maverick

Re: mossberge maverick