Ruger mini-14

Discussion in 'Website Help' started by graytruck, Dec 9, 2011.

  1. graytruck

    graytruck New Member

    I just bought a mini-14 and the trigger pull was more than I like.

    I took the trigger assembly out and then took the trigger off.

    There is a return spring that hooks on a pin, on each side of the trigger.

    I hooked one side of the spring on the pin and left the other side unhooked.

    Doing that and a little grease on the release mechanism and the trigger pull is about half of what it was and the trigger returns just fine.

    Does anyone thing this will hurt anything ?