I've now put about 200 rds thru it and the trigger seems to break more predictably but the whole trigger assembly is loose in the stock. I got out the instructions(yes instructions) and figured out how to break it down. Gave it a quick inspection and a light spray of gun oil. Making sure I tightened down the take out screw...it was not very tight when I took it apart... I tried to wiggle the trigger assembly and it wiggled the same as before. I did notice the pins which hold the trigger to the action are not as tight as I would think and had to keep my fingers on them to put the gun back together. I really don't like the side to side play and was wondering if this was normal?