>
Board Index Gear and Ammo Reloading

Cartridge Case Annealing Fixture

For reloaders and related equipment such as presses, dies, trimmers, scales, and bullet molds.

Cartridge Case Annealing Fixture

Postby 30calpigshooter » Sat May 08, 2010 3:16 pm

I have done a good amount of research on properly annealing the neck and or shoulder of cartridge brass. Found that 700 deg. F is the low & 800 F. the high limit. Also found that all of the top bench rest shooters anneal their cases every firing for uniform neck tension and extended case life. A competitor in a registered bench rest match recently set a 600-yard record of less than 1", it was his 58th firing with that brass.



I found a very reasonable cartridge brass-annealing fixture that is available called the Anneal-Rite. I have mine set up for .308 cases, cost was about $150.00 delivered. It can be found at www.cartridgeanneal.com. Their phone is 479-629-5566.



This unit works very slick for me and I can do 400 cases in an hour. Hope this proves useful to those interested in annealing their cases.
30calpigshooter
 
Posts: 1
Joined: Wed May 05, 2010 12:24 pm

Postby lrgcal4fun » Sun May 09, 2010 11:42 pm

Thanks 30calpigshooter! This is a great lead.
lrgcal4fun
 
Posts: 216
Joined: Thu Jan 17, 2008 5:42 pm


Return to Reloading

Users browsing this forum: No registered users and 1 guest

cron